Specifications
Revised 08/15/07
| SAE Grade Engine Class | 30 | 40 |
| Viscosity,cST @40oC | 135 | 180 |
| Viscosity,cST @100oC | 12.1 | 14.5 |
| Viscosity Index | 76 | 77 |
| Flash Point, (COC) Deg F | 465 | 480 |
| Pour Point, Deg F | -5 | +5 |
| TBN, ASTM D 2896 | 13 | 13 |
| Ash, %wt. Sulfated | 1.5 | 1.5 |
| Zinc Content, ppm | <10 | <10 |
| Gravity. API @ 60oF | 27 | 24 |
The values shown are typical of current production. Some are controlled in the manufacturing process, while others are not. All of them may vary within tolerable ranges.
Outstanding high-dispersancy, high-alkalinity crankcase oils for railroad and marine diesel engines. Compounded from MVI Base (Mixed-Base/Paraffinic-Napthenic) Oils to reduce hard carbon formation in ring belt area and minimize port blocking in tow-stroke cycle diesel engines. Contains detergent, dispersant, anti-wear, anti-oxidant, corrosion inhibitor, and foam-suppressant additives. The additives use do NOT contain ‘zinc-compound’ derivatives.
Applications
Recommended for use in Electro-Motive Division (EMD) of General Motors Corporation, Caterpillar, and other diesel engines operating on higher than normal sulfur distillate-fuel where sulfated ash of +1% is acceptable. Also highly recommended for medium speed industrial engines such as Fairbanks-Morse opposed-piston (OP) engines for which a medium viscosity index oil is the preferred product. In many marine applications this product can be used in both main propulsion engines as well as auxiliaries. Meets API Service Classification Level “CF”and former “CD”.
Davison Oil Company, Inc.
8450 Tanner Williams Road
Mobile, AL 36608
251-633-4444 www.davisonoil.com