Specifications
Revised 08/15/07
Typical Properties
| Appearance | Red, dyed |
| Viscosity, cSt @ 40oC | 33.74 |
| Viscosity, cSt@ 100oC | 7.35 |
| Viscosity, SUS @ 100oF | 174 |
| Viscosity, SUS @ 210oF | 51 |
| Flash Point, (COC)oF (Min.) | 350 |
| Pour Point, oF | -50 |
| Gravity, API | 30.5 |
The values shown are typical of current production. Some are controlled in the manufacturing process, while others are not. All of them may vary within tolerable ranges.
Manufactured from selected, highly refined base stocks and compounded with an additive system to enhance oxidation stability and thermal resistance. The fluid will improve low temperature operation, impart specified friction control, increase load-carrying ability, resist corrosion and prevent foaming. The product is a multipurpose automatic transmission lubricant recommended where a Dexron-III/Mercon fluid is required. Meets Ford M2C-33, M2C-138-CJ, M2C-166-H or Type A, Suffix A service levels.
Application
The multipurpose automotive transmission fluid (ATF) is generally recommended as a replacement fluid for automatic transmissions meeting original equipment manufacturers (O.E.M.) performance requirements for current General Motors, Ford, other domestic and imported passenger cars, vans and light trucks where DEXRON II, DEXRON II-E, DEXRON III, AND Ford/MERCON fluids are specified. The product can also be used as make-up and full fill fluid in Chrysler transmissions; however, it should be noted that Chrysler MS-7176 type fluid should be used when specified to satisfy warranty requirements.
This fluid is recommended for Detroit Diesel Allison C-3, C-4 applications. It also meets the requirements of Caterpillar TO-2. It is further recommended as a service fill fluid for Ford late model C-4 and C-6 transmissions.
The multifunctional power transmission fluid is suitable for power steering units where the manufacturer recommends a Dexron or Mercon fluid for its systems. Other manufacturer suggested applications include mobile hydraulic and industrial systems, and rotary air compressors under certain service conditions.
**NOTE: Product is manufactured to satisfy primary specification requirements of DEXRON II, DEXRON II-E, DEXRON III, and MERCON in functioning original equipment transmissions under service conditions. The use of General Motors/Dexron and Ford/Mercon trademarks have not been secured for this product.
Davison Oil Company, Inc.
8450 Tanner Williams Road
Mobile, AL 36608
251-633-4444 www.davisonoil.com