Specifications
Revised 2-8-00
Typical Properties
| SAE Grade, Automotive | 20W-50 |
| Viscosity, cSt@ 40oC | 175.0 |
| Viscosity, cSt@ 100oC | 18.5 |
| Viscosity Index | 120 |
| Viscosity, cP @ -15 0C | max 9500 |
| Flash Point, (COC), oF | +450 |
| Pour Point, OF | -20 |
| Neutralization No., TBN-E, ASTM D-2896 | 7.0 |
| Gravity, API @ 60oF | 27.5 |
| Sulfated Ash, %wt. | <1.0 |
The values shown are typical of current production. Some are controlled in the manufacturing process, while others are not. All of them may vary within tolerable ranges.
Pride Fleet 20w-50 Motor Oil is formulated to provide engine protection under severe operating conditions and meet the new maximum phosphorus limits provided by ILSAC GF-4 requirements. These changes are intended to extend automotive catalyst system life and provide minimum phosphorous levels that will ensure backward compatibility with older vehicles. They are blended from selected and highly refined base oils compounded to provide protection against wear and corrosion, prevent oxidative thickening and inhibit promotion of engine acids, sludge, and varnish deposits. The multi-grades may be used over a wide temperature range. They permit easier cold weather starting and help minimize engine friction at start-up.
Applications
Recommended for all major automotive gasoline and diesel engines, including those equipped with both superchargers and turbo chargers, used in passenger cars, light trucks, power boats, motorcycles, and other mobile and stationary equipment. SAE grade 10w-30 meets current ILSAC GF-4 requirements and API Classification SL, SM. It is suggested for use in place of former API Classifications SH, SJ. For optimum vehicle performance, operating under normal conditions, it is recommended that crankcase oil change intervals should not exceed 3,000 miles or three months for conventional mineral-based passenger car motor oil.
Davison Oil Company, Inc.
8450 Tanner Williams Road
Mobile, AL 36608
251-633-4444 www.davisonoil.com